16x24 Oval Std Gauge Blue Overlap Liner 48"/52" Wall Height

• Above-Ground Pools Only

Liner Visualization Tool
Click to See what this liner will look like in your pool.
(New Window will open)

Our premium liners are constructed of Standard and Heavy Gauge vinyl, our liners will last longer and maintain their beautiful appearance for years. Strong, double-welded seams will withstand winter’s worst.  Utilizing 100% virgin vinyl material, our liners are protected against chemicals and UV fading.  Our liners feature the best cold crack resistance in the industry.

Our liners are so rugged; they are backed by a 15-Year Warranty on Standard gauge liners and a 25-Year Warranty on the Heavy gauge.

All of the flat-bottom liners listed below will fit either a 48” or 52” sidewall.

If you have an overlap style liner in your above-ground swimming pool, you can simply look under the top rail (cap) on the outside of the pool, and you will see the liner hanging down along the outside of the pool wall.

Overlap style liners are installed under the top rail of your above-ground pool. In order to properly install an overlap style pool liner, the top rail of the pool must be removed from the entire perimeter.  The liner should then be put in the pool and draped over the top of the walls of the pool.  Long plastic clips install over the liner and top wall which hold the liner in place.  The top rails are then re-installed on the pool, and then you are ready to trim the excess liner hanging down on the outside of the pool.