HTH POOLIFE Stabilizer & Conditioner 4 lb.

• All In-Ground Swimming Pools
• All Above-Ground Swimming Pools

Sunlight exposure can deplete your pool of its proper chlorine supply. POOLIFE™ Stabilizer / Conditioner is a slow dissolving granular product that protects your pool from sunlight.  This will extend the time chlorine remains in your pool and provide added protection against bacteria and algae.

• Should be added slowly through the skimmer.
• As water circulated through the skimmer, the water’s turbulence helps dissolve the chemical.
• Any remnants of product that do not fully dissolve will dissolve on the filter components (media).
• Premature backwashing may wash away any undissolved cyanuric acid – the active ingredient in POOLIFE Stabilizer/Conditioner.
• After applying product, wait at least 48 hours before backwashing.
• It is recommended to backwash the filter prior to adding this product. Be careful not to add product too quickly. This could clog the filtration system.

Dosage/Frequency:

• This product is very insoluble (slow dissolving).
• As such, it may take weeks to dissolve completely.
• For ideal conditions, maintain a stabilizer level of 20 – 50 ppm. Use 16 oz. per 10,000 gallons.

Meets or exceeds all industry standards and specifications. If you need additional information on this product please contact us.