Product Details

Dolphin Nautilus Plus Robotic Pool Cleaner With Clever Clean

Packed with even more features and exceptional cleaning power, the Nautilus Plus with CleverClean is a must have for any pool up to 50 feet in length. This upgraded cleaner features CleverClean Technology, a software that systematically scans your pool to determine the most efficient path, regardless of the shape or surface of your pool, resulting in a clean pool every time. The weekly timer function allows the Nautilus Plus with CleverClean to automatically run its programmed two-hour cycle at set intervals throughout the week. The extra-large top access filter system is equipped with two full sets of filter cartridges. This means that both large and small debris will be filtered out from your water, resulting in a cleaner, clearer swimming pool.

One of the most defining features of Dolphin robots is the presence of a patented swivel cable. This technology addresses one of the most prevalent problems with robotic cleaner technology by allowing the cable to spin and rotate a full 360 degrees with the robot's movement in the water, without the cable becoming kinked or tangled. Another important feature to note about Dolphin Robotics is the fact that it is completely independent of you pool's pump and filter, enabling you to clean your pool using a fraction of the energy than other types of cleaning systems. The Nautilus Plus with CleverClean is also backed with a 30 month warranty leaving you worry free.

Nautilus Plus with CleverClean Features:

• CleverClean precise navigation system for complete pool coverage
• Scrubs, vacuums and filters all pool surfaces
• Easy to clean cartridge filter with spring clean up filter included
• Patented Dolphin swivel cable helps prevent tangling
• Incredibly efficient and costs less than 15 cents to clean the pool
• Plug-n-play with no pre-installation needed or connections to pool system
• Self-programmed 3D sensing technology for optimal pool scanning
• Top-Access Easy Clean Cartridge
• 30 month warranty bumper-to-bumper
• Order the Caddy Bundle for easy mobility and storage

Nautilus Plus with CleverClean Specifications:

• Cable length: 60 ft.
• Cycle time: 2 hours
• Swivel cable tangle prevention system
• Extra-large & easy to clean dual level cartridge filters
• Wall climbing, cleaning, and walls
• Weekly timer with industry-leading energy efficiency
• Cleaner Weight: 22 lbs.

Dolphin Nautilus & Triton Robotic Cleaners Comparison:

Dolphin Robotic Cleaners Basic Setup Guide

Cleaner Setup

• Unwind the floating cable and stretch it out completely so that it has no kinks
• Some models may arrive with plastic coverings on the brushes. Please Remove them before use

Power Supply

• Position the power supply so that it is in the approximate middle of the long side of the pool at a distance of 3.5m (12ft) from the edge of the pool
• Attach the floating cable to the power supply by inserting it with the notch on the connector (1) lined up with the groove in the socket on the power supply and turning clockwise
• Plug in the power supply and leave it in the OFF position

Place the Cleaner In The Pool

• Make sure that the floating cable is free of any obstructions
• Release the Pool Cleaner and let it sink to the floor of the pool
• To avoid kinks in the floating cable, place just enough cable in the water for the Pool Cleaner to reach the farthest corner of the pool
• Turn the power supply ON
• The Pool Cleaner will now operate until it has reached the end of the cleaning cycle

Removing The Pool Cleaner From The Pool

• Turn off and unplug the power supply
• Using the floating cable, pull the robot to the edge of the pool
• Grab the handle and remove the robot from the water - DO NOT PULL THE ROBOT OUT OF THE POOL USING THE CABLE
• Place the Pool Cleaner on the edge of the pool and let the water drain out

Helpful Hints

• When working, the Power Supply should be placed in the shade.
• Caution - Do not use an extension cable in any case whatsoever.
• If the Dolphin is fitted with combined or wonder brushes, gently squeeze the brushes until they are soaked with water.
• Release minimal required floating cable length to ensure proper pool coverage. Leave excess cable rolled outside the pool.
• After each cleaning cycle take the Dolphin out of the water to prevent accelerated wear and tear on its plastic parts.
• After each cleaning cycle wash the filter bag or cartridge. Clogged filter bags reduce scanning and cleaning efficiency. Once every two months, wash the filter bag in a washing machine, using a regular synthetic cycle.
• If your Dolphin is equipped with wonder brushes, rinse them in running water.
• For optimal operation, the water- temperature, pH, and chlorine levels should conform to the levels listed below:
  If any of these levels are different to those listed in the user instructions for your cleaner, please adhere to the levels noted here
• Temperature: 6℃ - 34℃ (43℉ - 93℉)
• pH level: 7.0-7.8
• Chlorine level: Max 4 ppm / NaCl 5000 ppm
• Once a week unplug the cable from the power supply, unwind the tangled portions of the cable, straighten it out and leave it in the sun for several hours.
• Store the pool cleaner in a shady place it's Caddy. If you don't have a caddy, place the pool cleaner upside down.

Product Specifications

• Manufacturer: Maytronics, U.S.
• Maytronics, U.S. Item Number: 99996403-PC
• UPC/GTIN: 00718117198717
• Condition: New
• Warranty: 30 Months