Product Details

Dolphin Triton Robotic Pool Cleaner with Power Stream With Swivel And Caddy

Lighter, smarter, and more powerful! The newly designed Triton with PowerStream is the answer to your pool cleaning needs! The new PowerStream Technology ensures superior wall and tile cleaning like never before. As the cleaner moves vertically up the wall, water is propelled out in multiple directions creating a constant grip. This enables precise cleaning while moving along the water line. The Triton with PowerStream also features active brushing which means the large brushes spin two times the speed of the robot, removing the most difficult, and stuck-to-the-wall contaminants. One of the obvious differences in this cleaner is the completely different body style. The Triton with PowerStream now has a large, hinged top cover that lifts upwards to reveal an extra-large capacity filter basket which is easily removed and cleaned. The floats were also removed since the PowerStream Technology enhances the climbing and maneuverability.

Another notable visual difference is the lack of a swivel on the cable for the Triton with PowerStream. This is because these units utilize software controlled anti-tangling algorithms to prevent the cable from tangling during its cleaning cycle. The weekly timer function allows the Triton with PowerStream to automatically run its programmed two-hour cycle at set intervals throughout the week. This cleaner is also equipped with a fast water release system that removes excess water making sure the cleaner is still lightweight even after completing its cleaning cycle. Backed by a 24 month warranty, the Triton with PowerStream has it all when it comes to robotics.

Bundle Includes

• Maytronics Dolphin Universal Caddy
• Get the Dolphin Triton Robotic Pool Cleaner With Power Stream With Swivel without Caddy - $1,099.00

Triton with PowerStream Features:

• PowerStream technology with enhance pin-point turning & climbing abilities for a deeper clean
• Scrubs, vacuums and filters all pool surfaces
• Easy to clean cartridge filter with spring clean up filter included
• Anti-tangling patented swivel cable allows the Triton PS to move freely around large residential pools with ease.
• Incredibly efficient and costs less than 15 cents to clean the pool
• Plug-n-play with no pre-installation needed or connections to pool system
• Active scrubbing & brushing spins at 2x the speed of the robot to power through debris
• Fast & debris-free water release system
• 24 month warranty bumper-to-bumper
• This bundle includes a caddy

Triton with PowerStream Specifications:

• Cable length: 60 ft.
• Cycle time: 2 hours
• Software controlled anti-tangling system
• Extra-large & easy to clean dual level cartridge filters
• Wall climbing, cleaning, and walls
• Automatic weekly timer with industry-leading energy efficiency
• Cleaner Weight: 16 lbs.

Dolphin Nautilus & Triton Robotic Cleaners Comparison:

Dolphin Robotic Cleaners Basic Setup Guide

Cleaner Setup

• Unwind the floating cable and stretch it out completely so that it has no kinks
• Some models may arrive with plastic coverings on the brushes. Please Remove them before use

Power Supply

• Position the power supply so that it is in the approximate middle of the long side of the pool at a distance of 3.5m (12ft) from the edge of the pool
• Attach the floating cable to the power supply by inserting it with the notch on the connector (1) lined up with the groove in the socket on the power supply and turning clockwise
• Plug in the power supply and leave it in the OFF position

Place the Cleaner In The Pool

• Make sure that the floating cable is free of any obstructions
• Release the Pool Cleaner and let it sink to the floor of the pool
• To avoid kinks in the floating cable, place just enough cable in the water for the Pool Cleaner to reach the farthest corner of the pool
• Turn the power supply ON
• The Pool Cleaner will now operate until it has reached the end of the cleaning cycle

Removing The Pool Cleaner From The Pool

• Turn off and unplug the power supply
• Using the floating cable, pull the robot to the edge of the pool
• Grab the handle and remove the robot from the water - DO NOT PULL THE ROBOT OUT OF THE POOL USING THE CABLE
• Place the Pool Cleaner on the edge of the pool and let the water drain out

Helpful Hints

• When working, the Power Supply should be placed in the shade.
• Caution - Do not use an extension cable in any case whatsoever.
• If the Dolphin is fitted with combined or wonder brushes, gently squeeze the brushes until they are soaked with water.
• Release minimal required floating cable length to ensure proper pool coverage. Leave excess cable rolled outside the pool.
• After each cleaning cycle take the Dolphin out of the water to prevent accelerated wear and tear on its plastic parts.
• After each cleaning cycle wash the filter bag or cartridge. Clogged filter bags reduce scanning and cleaning efficiency. Once every two months, wash the filter bag in a washing machine, using a regular synthetic cycle.
• If your Dolphin is equipped with wonder brushes, rinse them in running water.
• For optimal operation, the water- temperature, pH, and chlorine levels should conform to the levels listed below:
  If any of these levels are different to those listed in the user instructions for your cleaner, please adhere to the levels noted here
• Temperature: 6℃ - 34℃ (43℉ - 93℉)
• pH level: 7.0-7.8
• Chlorine level: Max 4 ppm / NaCl 5000 ppm
• Once a week unplug the cable from the power supply, unwind the tangled portions of the cable, straighten it out and leave it in the sun for several hours.
• Store the pool cleaner in a shady place it's Caddy. If you don't have a caddy, place the pool cleaner upside down.

Product Specifications

• Manufacturer: Maytronics, U.S.
• Maytronics, U.S. Item Number: 99996207-USW-CADDY
• UPC/GTIN: 00724131497958
• Condition: New
• Warranty: 2 Years