The Iron, Cobalt, and Spot Etching Stuff is a non-acidic product for removing
iron, cobalt, and spot-etching stains from all types of pool surfaces without
draining the pool. It will normally remove these stains easily and effectively within 48 hours, with minimal rebalancing of other pool chemical products.
Jack's Magic Products, Inc., the pool and spa industry's leader in
identifying, preventing and removing stains and discoloration, has built a
reputation for innovative quality products and programs that deliver results. By
treating stain issues with the pool water left in the pool, it is estimated that
Jack's Magic products save over 200 million gallons of pool water annually that
would otherwise be lost if a pool was drained and acid washed. Jack's Magic is
one of the most widely known and respected brands, and is marketed and
distributed nationally and internationally. Committed to the highest levels of
customer satisfaction, Jack's Magic supports its brand, products, programs, and
customers through training, education, and support.
Frequently Asked Questions:
- Is it safe to swim after adding the Iron, Cobalt, and Spot Etching
No; do not swim until the stains have been removed and your water
chemistry is back to the appropriate levels.
- How much do I need?
2 lbs. per 12,000 gallons
- Why did my stains turn black after adding this product?
The stains you are trying to treat are copper, instead of iron. Use
Copper and Scale Stuff to remove these stains.
- How long will the treatment take?
As long as your water chemistry is adjusted properly, the treatment
should be fully reacted within 48 hours.
- What happens during the treatment if my dog gets into the pool?
When doing this treatment, there are no adverse conditions that would
harm a pet. The reason we don't advise swimming during this treatment is
because the chlorine level is lower than recommended levels for swimming.
- When doing this treatment, is it a good idea to wait for the chlorine
to come down on its own?
No. This is a common mistake made especially in the warmer months. By
not using After Shock Chlorine Remover, you will create a significant
chlorine demand which may create an algae problem. By using After Shock, you
can immediately lower the chlorine level and start the treatment the same