Dolphin Explorer E20 Robotic Swimming Pool Cleaner
With the Dolphin Explorer E20, maintaining a clean and sparkling pool has never been easier. Its lightweight design makes it effortless to lift and maneuver, allowing for stress-free cleaning. The E20 is equipped with powerful scrubbing technology that effectively removes dirt and debris from the walls and floor of your pool. Its top-loading filter system is simple and easy to use, allowing you to remove debris without ever touching it. This saves you time and effort while ensuring maximum hygiene for your pool.
Additionally, the Dolphin Explorer E20 is an energy-efficient solution for your pool cleaning needs. It reduces the usage of water, chemicals, and energy with every cleaning cycle, making it an eco-friendly option. Its plug-and-play feature eliminates the need for complicated installation or setup procedures. Simply plug it in and drop it into your pool for a thorough and hassle-free cleaning.
Dolphin Explorer E20 Features:
Provides floor and wall coverage, making your whole pool exceptionally clean.
Easy Access Top Loader Filter
No more touching the debris! Lift the filter out, unsnap the bottom and rinse.
Easy to lift design for unburdened lifting and handling.
Just plug it in, drop into the pool, for a hassle free clean.
Reduces water, chemical, and energy usage with every pool cleaning.
Dolphin Explorer E20 Specifications:
Weekly timer: Yes
Automation mode: Yes
Filter Type: Fine filter kit
Filter access: Top access
Cleaning coverage: Floor and walls
Active brush: Yes
Suction rate: 4,000 gph
Cable length: 50 ft.
Cleaner Weight: 15 lbs.
Dolphin Robotic Cleaners Basic Setup Guide
Unwind the floating cable and stretch it out completely so that it has no kinks
Some models may arrive with plastic coverings on the brushes. Please Remove them before use
Position the power supply so that it is in the approximate middle of the long side of the pool at a distance of 3.5m (12ft) from the edge of the pool
Attach the floating cable to the power supply by inserting it with the notch on the connector (1) lined up with the groove in the socket on the power supply and turning clockwise
Plug in the power supply and leave it in the OFF position
Place the Cleaner In The Pool
Make sure that the floating cable is free of any obstructions
Release the Pool Cleaner and let it sink to the floor of the pool
To avoid kinks in the floating cable, place just enough cable in the water for the Pool Cleaner to reach the farthest corner of the pool
Turn the power supply ON
The Pool Cleaner will now operate until it has reached the end of the cleaning cycle
Removing The Pool Cleaner From The Pool
Turn off and unplug the power supply
Using the floating cable, pull the robot to the edge of the pool
Grab the handle and remove the robot from the water - DO NOT PULL THE ROBOT OUT OF THE POOL USING THE CABLE
Place the Pool Cleaner on the edge of the pool and let the water drain out
When working, the Power Supply should be placed in the shade.
Caution - Do not use an extension cable in any case whatsoever.
If the Dolphin is fitted with combined or wonder brushes, gently squeeze the brushes until they are soaked with water.
Release minimal required floating cable length to ensure proper pool coverage. Leave excess cable rolled outside the pool.
After each cleaning cycle take the Dolphin out of the water to prevent accelerated wear and tear on its plastic parts.
After each cleaning cycle wash the filter bag or cartridge. Clogged filter bags reduce scanning and cleaning efficiency. Once every two months, wash the filter bag in a washing machine, using a regular synthetic cycle.
If your Dolphin is equipped with wonder brushes, rinse them in running water.
For optimal operation, the water- temperature, pH, and chlorine levels should conform to the levels listed below:
If any of these levels are different to those listed in the user instructions for your cleaner, please adhere to the levels noted here
Temperature: 6℃ - 34℃ (43℉ - 93℉)
pH level: 7.0-7.8
Chlorine level: Max 4 ppm / NaCl 5000 ppm
Once a week unplug the cable from the power supply, unwind the tangled portions of the cable, straighten it out and leave it in the sun for several hours.
Store the pool cleaner in a shady place it's Caddy. If you don't have a caddy, place the pool cleaner upside down.
Maytronics, U.S. Item Number:
Maytronics, U.S. Item 99996148-XP Documentation and Manuals
There are currently no documents or manuals available for this item.
Maytronics, U.S. 99996148-XP meets or exceeds all industry standards and specifications.
If you need additional information on this product please
Maytronics, U.S. Item 99996148-XP Suggested Applications
All Concrete, Colored Plaster and Painted Pools
All Inground Vinyl Liner Swimming Pools
Orders Under $50
Orders Over $50
We only ship orders to the 48 contiguous United States.
Chemicals, pool paint, and some oversized items, will
only ship via ground service. Items shipped via Freight Service, such as pool heaters, will
only ship via ground service. All orders shipping to Maryland will incur a 6% sales tax charge.
Some items, including hazmat, may require a Direct Signature upon delivery.
Shipments must be inspected by customer prior to signing delivery receipt.
Orders containing small and light-weight items may ship via FedEx SmartPost or USPS.
You may return an item sold to you by Hydropool.com up to 30 days after purchase. The product must be in good condition, unused, in original packaging, and must have all parts, accessories and paperwork; returns without these requirements and/or guidelines will not be accepted.
If a delivery attempt is unsuccessful on order requiring a direct signature, a 15% - 25% re-stock fee may be applied should the order be returned to Hydropool.com by the carrier.
Any claims to missing parts, items or damaged goods for any orders must be made within 15 days of delivery date. We are not able to credit your shipping and handling fees if the wrong product was ordered due to customer error. However, if you received the wrong products due to an error on our behalf, we will pay for the return services fees and you will receive a full refund or exchange.
To return an item to Hydropool.com, please call 800-4MY-POOL to get a Return Merchandise Authorization number (RMA) and return instructions. Any items returned without an RMA number will be refused. We will process your refund upon receipt of the returned product.
Products that cannot be returned:
Products that may incur a re-stock fee of 15% - 25%:
Pool Cleaners *
Pool Heaters *
Pool Pumps *
Pool Filters *
Pool Lights & Fixtures *
Pool Ladders & Rails *
Pool Slides *
Pool Chlorinators *
Custom Manufactured Safety Covers
Pool & Spa Electronics or Controls *
In-Stock Safety Covers
Pool Covers that are Ordered and for the Incorrect Pool Size
Spa Cover Lifters *
Umbrellas & Umbrella Stands, and Hammocks *
* These products must not have been used, installed, or attempted to have been installed. All products must include original paperwork, parts & accessories, and everything accompanied with the product.
Concealed damage on any ground shipment must be reported within 3 business days. Freight shipments must be inspected for damages prior to customer signing delivery receipt. Please email any information regarding concealed damage to firstname.lastname@example.org. Please reference your order number in all order related email correspondence.
Customer is responsible for any/all return shipping charges. Some returns may be subject to a 15% - 25% restock fee that will be deducted from your refund.
Please call 800-4MY-POOL if you have questions regarding this return policy.
Thank you for shopping Hydropool.com!
What do others have to say?